Mounting Presses

Opal 410

The OPAL 410 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. Mould assemblies can be exchanged quickly and without tools.

The robust aluminium construction is powder coated. With its solid construction and ATM hydraulic system, the operating noise of the hot mounting press is minimized. Our comprehensive selection of mould assemblies from Ø 25.2-40 mm and different pressure methods enable optimum mounting of your sample. Two mounts can be produced simultaneously with the use of a spacer.

Product Advantages

  • Automatic hot mounting press
  • Fully hydraulic, water cooled
  • Bayonet closure
  • Automatic program cycle
  • Mould assembly easy to change
  • Solid aluminium case construction, powder coated

Features

Mould assembly - Ø 25.2 - 40 mm (6 different sizes)
Closure system - bayonet
Thermostate range - 20-200°C
Heating time - variable 0-30 min
Cooling time - variable 0-30 min
Max. pressure in mould assembly depending on mould assembly's size - 450 bar
Connection power - 3.1 kVA
Heating power - 4x 500 W
W x H x D - 350 x 400 x 450 mm
Weight - ~ 40 kg

Opal 460

The OPAL 460 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. The fully automatic sliding closure allows quick and easy opening/closing of the mould assembly. Mould assemblies can be exchanged quickly and without tools.

The robust aluminium construction is powder coated. With its solid construction and ATM hydraulic system, the operating noise of the machine is minimized. Our comprehensive selection of mould assemblies from Ø 25.2-50 mm and different pressure methods enable optimum mounting of your sample. Two mounts can be produced simultaneously with the use of a spacer.

The Opal 460 and 480 are available not only as single units but also as a bench standing unit. By integrating the mounting presses into our System, we produce a comfortable working height. Optionally, the SYSTEM-MOUNTING PRESS can be equipped with a closed cooling water system, so it becomes independent from any mains water supply. In addition, the water consumption is reduced to a single filling (6 litres). The system-mounting presses are available as twin- or triple powder-coated aluminum units and fit perfectly into our ATM System Lab.

Product Advantages

  • Easy to handle closure system
  • Fully automatic, electronic controlled
  • Simple operation via large LC display and optimized user interface
  • 18 programs to save with free configuration
  • 4 different modes for pressure to select
  • Automatic water cooling (with economy function)
  • Fully hydraulic pressure mode
  • Double mounting possible
  • Mould assembly easy to change
  • Solid aluminium case construction, powder coated
  • Also available as a system mounting press with closed cooling water system and comfortable working height

Features

Mould assembly - Ø 25.2 - 50 mm (7 different sizes)
Closure system - slide closure
Thermostate range - 20-200°C
Heating time - adjustable
Cooling time - adjustable
Max. pressure in mould assembly depending on mould assembly's size - 250 bar
Connection power - 3.1 kVA
Heating power - 4x 500 W
W x H x D - 390 x 450 x 500 mm
Weight - ~ 61 kg

Opal 480

The OPAL 480 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. The fully automatic sliding closure allows quick and easy opening/closing of the mould assembly. Mould assemblies can be exchanged quickly and without tools.

Also rectangular moulds can be produced. With its solid construction and ATM hydraulic system, the operating noise of the machine is minimized. Our comprehensive selection of mould assemblies from Ø 50-70 mm, rectangular moulds of 30x60/40x60 mm and different pressure methods enable optimum mounting of your sample.

The Opal 460 and 480 are available not only as single units but also as a bench standing unit. By integrating the mounting presses into our System, we produce a comfortable working height. Optionally, the SYSTEM-MOUNTING PRESS can be equipped with a closed cooling water system, so it becomes independent from any mains water supply. In addition, the water consumption is reduced to a single filling (6 litres). The system-mounting presses are available as twin- or triple powder-coated aluminum units and fit perfectly into our ATM System Lab. 

Product Advantages

  • Fully automatic, electronic controlled
  • Sliding closure system for easy opening ans closing
  • Big, clearly LCD display and optimized user interface
  • 18 programs to save with free configuration
  • 4 different modes for pressure to select
  • Automatic water cooling (with economy function)
  • Fully hydraulic pressure mode
  • Double mounting possible
  • Mould assembliy easy to change
  • Solid aluminium case construction, powder coated
  • Also available as a system mounting press with closed cooling water system and comfortable working height

Features

Mould assembly - Ø 40 mm / Ø 50 mm / Ø 60 mm / Ø 70 mm, rectangle 30 x 60 mm, rectangle 40 x 60 mm
Closure system - slide closure
Thermostate range - 20-200°C
Heating time - adjustable
Cooling time - adjustable
Max. pressure in mould assembly depending on mould assembly's size - 310 bar
Connection power - 3.6 kVA
Heating power - 4x 630 W
W x H x D - 390 x 450 x 500 mm
Weight - ~ 68 kg